Lab Ovens & Equipments
Tubular Heaters
Finned Strip Heaters
Duct Heaters
Circulation Heaters
Ceramic Band Heaters
Industrial Ovens
Load Banks
Suction Heaters
Drum Heaters
Cartridge Heaters
Process Immersion Heaters
Band Heaters
Temparature Sensors
Casted Heaters
U.V Weathering Tester
Mica Strip & Plate Heaters
Ceramic Heating Elements
High Density Catridge Heaters
Climatic Chambers
Matrusree Drum heaters are used to pre-heat liquids in drums or pails to make them less viscous and more flow able. They are suitable heat sources when heat is required to handle liquids during pouring, dipping, coating or mixing operations. Matrusree Drum heaters are made to brace a drum externally and they are easily installed and removed when needed.
Design Features:
  • Stainless steel case
  • Adjustable heat
  • Easy installation and removal
  • Suitable for standard drum sizes
  • 6 ft power cord and plug
  • CSA certified
  • Rapid heat-up of drum
  • Durable metal design
  • Infinite switch or thermostat
  • 3-heat control
  • 6 ft. power cord
  • Variety of sizes and ratings
Matrusree drum heaters have a rugged construction, made to withstand the harsh industrial environment. They are available in two styles. The one piece construction heater that comes with a spring loaded handle and a snap action bi-metal temperature controller (220 F). The HDX model is a two piece construction heater that has a latch and trunion fastener with a bulb and capillary thermostat (250 F).
Temperature Control:
Thermostat Control models sense temperature in an area remote from the heating element and will automatically cycle heater to maintain set temperature. Three-heat switch allows three wattage ratings per thermostat setting and voltage rating.

Mayrusree Drum Heater comes with temperature controllers. When the pilot lamp is on, the heater is Active. Our models have bulb and capillary thermostats (250 F). Another models have snap action bimetal temperature controllers (220 F). After an initial trial these controllers have to be set in proportion to the maximum settings and required temperature
Matrusree Drum heaters are made for 120V or 240V power supplies. Appropriate power cords and plugs are supplied for each voltage and wattage. The power supply should be rated to handle the amperage drawn by the heater. Different liquids absorb heat at different rates so the wattage of a Drum heater should be selected accordingly.
Since the Matrusree drum heater is not a sealed product, it should be used indoors and kept away from moisture and contamination. In general, these heaters are maintenance free. A periodic check to ensure that they are securely fastened to the drum is recommended. The power cord is rated to withstand 220 F and should never come in contact with the heater.
Matrusree drum heaters should not be used on pressure tight containers, containers with explosive materials, or in explosive environments
Copyright© All rights reserved | Matrusree Electro Heats | Privacy Policy